#0037: Tip for securing a cabled USB type-A plug and socket together

Preamble

This is a quick budget tip for securing a cabled USB type-A male and female plug and socket together. This technique could probably be extrapolated for use with other plug types. However I have yet to do so.

Tip for securing a USB type-A male and female plug and socket together

Now onto the tip. Simply put, I use an elastic band to hook the two plugs together. That’s it. Done. Thank you for reading…

Still here? Okay, now onto the part where we explore in excessive detail such a simple concept. One so simple you probably have immediately intuited the basic theory of operation. If not then here it is. Basically, the elastic band applies a pulling pressure that keeps the plug and socket engaged. This is especially useful when you have an otherwise loose connection, typically caused by issues such as weak retention springs within the female socket. Something that seems common to USB extension cables in my opinion. At least the ones I have encountered.

Method of application

I like to start by using a basic cow hitch to lasso one of the plugs. This is done by folding the band into a loop and simply inserting a plug into this loop. Then tightening it around the plug’s plastic shoulders. That’s a basic cow hitch.

Now, with the other side of the elastic band wind it around the plastic shoulders of the second plug a couple of times until the elastic is reasonably taught. Then insert the male into the female plug. And done. The band should now exert force that will keep pulling them together.

Elastic band application demonstration video

Best practices

For best results, I recommend using a reasonably strong elastic band. I also recommend only wrapping it around the plug’s plastic enclosure itself, and not involving their respective cables. This is so that no force is applied to the cables themselves. Force which may aid in the development of faults such as repetitive flex damage, or a kink in the cable. Additionally when the band is secured on the plug body it focuses and directionalises the force in a way that better pulls the cable ends together.

An attentive reader may notice that in one of my example images, the one with the beige elastic. The upper band loop is a little bit too high up, and sits on the plastic wire strain relief itself, rather than the plastic plug body. What can I say? Do as I say, not as I do. 😉 Its really not a huge deal either way. Securing the loop on the plug body is just what I consider best practice.

Why not use adhesive tape instead?

Alternatively to using elastic bands, you may think: why not use tape to adhere the two ends together? Briefly put, tape is messy – it leaves glue residue when removed, it’s too permanent or hard to remove, and probably most importantly: it doesn’t put pressure on the plugs to keep them together. So as time passes the plug could slowly but steadily slip out of it’s respective socket. Due to things like vibration, gravity, or general handling.

Closing thoughts and my use-case summary

In my particular use-case, I use elastic bands like these to keep the USB extension cables attached to my 4 Watt USB lights and their switches. The weak retention springs within the female USB sockets on the extension cables allow any plugs inserted into them to eventually slip out.

I used to use electrical tape to manage this but, as time went on the tape lost it’s adherence. Yet left a mess of melted glue residue. After this I switched to using duct tape, but it was too strong, and too difficult to easily remove when I wanted to. Hence the bands. Third time the charm it seems.

So far, just common garden variety elastic bands seem to work best for me in this application. Whatever you can find is fine. Funny thing is, I didn’t even buy them. I just collected the ones that my mail man keeps dropping around my door.

All in all. This is an example of a zero budget application of junk that has gained value via use. At least I found it to be so. Anyway, I hope this article is of use to you. At the very least I hope I can raise a little awareness of the genuine potential uses of random household miscellanea. And that it may assist you in exploring alternative DIY solutions to purchasing one’s way out of any given problem. I know I have been guilty of that.

Thank you for reading.